NodeMCU ESP8266 // Video - 4 //how to Connect Dc motor / DC Motor speed and direction control Blynk

//CODE:-

#define BLYNK_PRINT Serial

/* Fill-in your Template ID (only if using Blynk.Cloud) */

#define BLYNK_TEMPLATE_ID "TMPLrYiUPT_X"

#define BLYNK_DEVICE_NAME "DC MOTOR"

#define BLYNK_AUTH_TOKEN "hJ08jZszJN0ctz9Jt459xdf7Qpi06SKs"

#include <ESP8266WiFi.h>

#include <BlynkSimpleEsp8266_SSL.h>

// You should get Auth Token in the Blynk App.

// Go to the Project Settings (nut icon).

char auth[] = "hJ08jZszJN0ctz9Jt459xdf7Qpi06SKs";

// Your WiFi credentials.

// Set password to "" for open networks.

char ssid[] = "AyubCreation";

char pass[] = "11221122";

int M1PWM = D5; //GPIO14

int M2PWM = D6; //GPIO12

int M1P = D1;  //GPIO5

int M1N = D2;  //GPIO4

int M2P = D3;  //GPIO0

int M2N = D4;  //GPIO2

int pinValue1;

int pinValue2;

BLYNK_WRITE(V1)

{

  int pinValue1 = param.asInt(); // assigning incoming value from pin V1 to a variable

  analogWrite(M1PWM,pinValue1);

  Blynk.virtualWrite(V1, pinValue1);

  Serial.print("V1 Slider value is: ");

  Serial.println(pinValue1);

}

BLYNK_WRITE(V2)

{

  int pinValue2 = param.asInt(); // assigning incoming value from pin V2 to a variable

  analogWrite(M2PWM,pinValue2);

  Blynk.virtualWrite(V2, pinValue2);

  Serial.print("V2 Slider value is: ");

  Serial.println(pinValue2);

}

void setup()

{

  pinMode (M1PWM,OUTPUT);

  pinMode (M2PWM,OUTPUT);

  pinMode (M1P,OUTPUT);

  pinMode (M1N,OUTPUT);

  pinMode (M2P,OUTPUT);

  pinMode (M2N,OUTPUT);

  // Debug console

  Serial.begin(9600);

  Blynk.begin(auth, ssid, pass);

}

void loop()

{

  Blynk.run();

}

<script async src="https://pagead2.googlesyndication.com/pagead/js/adsbygoogle.js?client=ca-pub-1276897778048972"

     crossorigin="anonymous"></script>